1. Select Menu -> Par -> Multi Par
2. Set the desired Par time using the arrow buttons.
3. Press Start to activate or Back to go back
Note
The user has to set Multi Par N before Multi Par N+1 can
be set. For example, Multi Par 1 has to be set before
Multi Par 2 can be set.
Menu -> Par -> Auto Par
In Auto Par (Automatic Par) setting, both Par and Delay
times are selected for a number of strings up to a maxi-
mum of 20. Once the Start button is pressed and the
timer activated, it will run all strings programmed auto-
matically until completed.
Example:
String 1 Par 3.0 sec.
Delay 2.0 sec.
String 2 Par 5.0 sec.
Delay 3.0 sec.
String 3 Par 6.5 sec.
Delay 3.0 sec.
String 4 Par 3.0 sec.
The example above shows that four Par strings were
programmed to function consecutively, each with a dif-
ferent Par time and a different Delay between each Par
setting. The timer will begin after the preset delay, with
the first Par time of 3.0 seconds, followed by a 2 second
delay. Each new Par time string will begin with the buzz-
er and clock counting from zero and the buzzer resound-
ing at the end of selected Par time, followed by the
given delay, and then the starting of the next Par string
and so on until the last Par time string programmed has
been completed.
25
