1 x
Cafe Panel 1-1/4 x 28-1/2 x 102”
1 x
SW Wall Panel 1-1/4 x 38-1/2 x 83”
1 x
Post 2 x 4 x 102”
Wood Parts
Hardware
Other Parts
4 x
2 x 2-1/4” Corner Panel Bracket
2724
16 x
#12 x 3/4” Pan Screw
S8
Step 4: Swing Wall Panel Assembly
Part 1
A:
Place (2528) SW Wall Panel on the ground then measure 4” up from the bottom of the panel and 4” down
from the top of the panel on both sides and attach four 2 x 2-1/4” Corner Panel Brackets to the panel with 2 (S8)
#12 x 3/4” Pan Screws per bracket. The flat edges of the brackets sit flat against the panel. (fig. 4.1 and 4.2)
B:
With a helper hold (2724) Cafe Panel up against the right side edge of (2528) SW Wall Panel so the bottom
edges are flush. Attach Corner Panel Brackets to (2724) Cafe Panel with 2 (S8) #12 x 3/4” Pan Screws per
bracket. (fig. 4.1 and 4.2)
C:
Place (2473) Post up against the left side of (2528) SW Wall Panel so the bottom edges are flush, noticing
the hole locations in the top of the board, then attach Corner Panel Brackets to (2473) Post with 2 (S8) #12 x 3/4”
Pan Screws per bracket. (fig. 4.1 and 4.2).
Flat edge
Fig. 4.2
2724
Fig. 4.1
S8
2 x 2-1/4”
Corner Panel
Bracket
2473
x 4 per
bracket
2 x 2-1/4” Corner
Panel Bracket
2 x 2-1/4”
Corner
Panel
Bracket
4”
2528
2473
2 x 2-1/4”
Corner Panel
Bracket
2528
Flush
Flush
Bottom
Notice holes
facing up
25
support@cedarsummit.com
Summary of Contents for Abbeydale Clubhouse F23920
Page 90: ...NOTES 90 support cedarsummit com ...
Page 91: ...NOTES ...