Step 24: Attach Swing Assembly to Fort
2 x
Ground Stake 1-1/4 x 1-1/2 x 14”
Hardware
Wood Parts
4 x
#8 x 2-1/2” Wood Screw
1 x
5/16 x 4-1/2” Hex Bolt
(5/16” lock washer, 5/16” flat washer, 5/16” t-nut)
1 x
5/16 x 2” Hex Bolt
(5/16” flat washer x 2, 5/16” lock nut)
S3
Fig. 24.2
Fig. 24.3
G5
WARNING:
To prevent tipping and avoid potential injury,
stakes must be driven 10-1/2” into ground. Digging or driving
stakes can be dangerous if you do not check first for under-
ground wiring, cables or gas lines.
A:
Attach Swing Assembly from Step 23 to (2486) SW Mount with 1 (G5) 5/16 x 4-1/2” Hex Bolt (with lock washer,
flat washer and t-nut) and 1 (G8) 5/16 x 2” Hex Bolt (with 2 flat washers and 1 lock nut) as shown in fig. 24.1 and
24.2.
B:
Drive 1 (0318) Ground Stake 10-1/2” into the ground at each (2471) Heavy SW Post on the inside of the
assembly and attach with 2 (S3) #8 x 2-1/2” Wood Screws per ground stake. (fig. 24.1 and 24.3)
G8
G5
G8
0318
10-1/2” Into Ground
2471
2471
Fig. 24.1
5/16” Lock
Washer
5/16” Flat
Washer
5/16”
T- Nut
5/16”
Lock nut
5/16”
Flat
Washer
0318
2486
S3
61
support@cedarsummit.com
Summary of Contents for Abbeydale Clubhouse F23920
Page 90: ...NOTES 90 support cedarsummit com ...
Page 91: ...NOTES ...