Fig. 31.3
2516
Inside View
Fig. 31.4
Fig. 31.2
2478
2528
2528
Step 31: Access Ladder Assembly
Part 2
C:
On the outside of the assembly on (2528) SW Wall Panel remove the 6 screws shown in fig. 31.3.
D:
On the inside of the assembly place the Access Ladder Assembly tight against the slats on (2528) SW Wall
Panel and tight to (2478) Floor. The angled edges of the (2516) SW Nest Access Post face up and out. Attach
from outside of the assembly in the same holes the screws were removed from with 6 (S7) #12 x 2” Pan Screws
(with 3/16” flat washer). (fig. 31.2, 31.3 and 31.4)
Hardware
6 x
#12 x 2” Pan Screw (3/16” flat washer)
S7
S7
with
3/16” Flat
Washer
Outside View
Notice
orientation of
angles
Tight
Flush
x 6
72
support@cedarsummit.com
Summary of Contents for Abbeydale Clubhouse F23920
Page 90: ...NOTES 90 support cedarsummit com ...
Page 91: ...NOTES ...