Hardware
Note:
Make sure there is a 1-1/4” gap from the outside edge of each (232) Transom Side to the outside edge of
(233) Transom Roof. (fig. 23.9)
E:
Attach (233) Transom Roof flush to the outside edge of each (232) Transom Side and to (220) Front Roof
Panel with 8 (S15) #8 x 1-3/4” Wood Screws, as shown in fig. 23.8 and 23.9.
Step 23: Roof Assembly
Part 3
Fig. 23.8
Fig. 23.9
233
Wood Parts
1-1/4”
8 x
#8 x 1-3/4” Wood Screw
S15
1 x
Transom Roof FSC 5/4 x 8 x 36”
233
S15
S15
x 8
232
232
Note:
Angled
edge to this side.
220
Flush
Parts removed
for clairty.
91
support@cedarsummitplay.com