2 x
#8 x 3” Wood Screw
2 x
#8 x 1-3/4” Wood Screw
2 x
5/16 x 2-3/8” Wafer Bolt
(5/16” flat washer, 5/16” t-nut)
Wood Parts
Hardware
2 x
Roof Upright FSC 2 x 2 x 20”
1 x
A Frame Ridge FSC 2 x 2 x 27-3/4”
451
S4
452
Step 45: A Frame Roof Assembly
Part 2
C:
From inside the assembly, attach 1 (451) Roof Upright to each (392) A Frame Top Side with 1 (WB8) 5/16 x
2-3/8” Wafer Bolt (with flat washer and t-nut) in the bottom hole and 1 (S15) #8 x 1-3/4” Wood Screw in the top
hole. The bolt and screw are installed from the outside of the assembly. (fig. 45.4 and 45.5)
D:
Attach (452) A Frame Ridge to tops of (451) Roof Uprights with 2 (S4) # 8 x 3” Wood Screws, so each end
has an overhang of 2-1/8”. (fig. 45.4 and 45.5)
Fig. 45.4
Fig. 45.5
5/16” Flat
Washer
5/16”
T-Nut
451
452
392
451
392
2-1/8”
WB8
WB8
S4
WB8
S15
S15
S15
119
support@cedarsummitplay.com