Step 45: A Frame Roof Assembly
Part 3
E:
Place Canopy over (452) A Frame Ridge making sure the bottom edges of tarp are even on both sides of
the assembly. (fig. 45.6)
F:
Secure one side of the Canopy by attaching to (450) A Frame Roof End with 4 (S13) #6 x 5/8” Pan Screws
(with #8 flat washer). (fig. 45.6 and 45.7)
G:
Make sure the Canopy is smooth and tight then secure to the remaining (450) A Frame Roof End with 4
(S13) #6 x 5/8” Pan Screws (with #8 flat washer). (fig. 45.6 and 45.7)
H:
Attach Canopy to each end of (452) A Frame Ridge with 2 (S13) #6 x 5/8” Pan Screws (with #8 flat
washer). Install screws 1/2” from each edge. (fig. 45.6 and 45.7)
Fig. 45.6
450
Fig. 45.7
1/2”
450
Hardware
10 x #6 x 5/8” Pan Screw (#8 flat washer)
1 x Canopy
Other Parts
w/ #8 Flat
Washer
#8 Flat Washer
452
w/ #8 Flat Washer
S13
S13
S13
S13
120
support@cedarsummitplay.com