Step 48: Attach Hand Grips to A Frame
Pre-drill all holes using a 3/16” drill bit before installing the Lag Screws.
A:
Measure 2” up from the top of (381) A Frame Access L and (380) A Frame Access R then attach 1 Hand Grip
to each (390) A Frame Upright with 2 (WL3) 1/4 x 1-3/8” Wafer Lags (with flat washer) per Hand Grip. Make
sure the top of the Hand Grip sits above the bolt holes in both (390) A Frame Upright. (fig. 48.1 and 48.2)
1/4” flat
washer
Hand Grip
390
Hardware
4 x
1/4 x 1-3/8” Wafer Lag
(1/4” flat washer)
Other Parts
2 x Hand Grip
381
380
2”
Fig. 48.1
Fig. 48.2
WL3
Place above
bolt hole
390
1/4” flat
washer
WL3
Hand Grip
123
support@cedarsummitplay.com