1 x
Floor End FSC 5/4 x 6 x 38-1/2”
1 x
Door Bottom FSC 1 x 4 x 33-1/2”
Wood Parts
092
8 x
#8 x 1-3/8” Wood Screw
4 x
#8 x 3” Wood Screw
2 x
#8 x 1-3/4” Wood Screw
2 x
5/16” T-Nuts
Hardware
S20
Step 9: Door Wall Assembly
Part 5
H:
On the outside of the assembly attach (092) Floor End to (061) Door Wall Window Panel with 2 (S15) #8 x
1-3/4” Wood Screws in the bottom holes and to (062) Front Floor and (064) Back Floor with 4 (S4) #8 x 3” Wood
Screws in the remaining holes, as shown in fig. 9.12 and 9.13. Notice the orientation of the holes. Make sure the
top of (092) Floor End measures 5/8” from top of both (062) Front Floor and (064) Back Floor. From inside the
assembly attach two 5/16” t-nuts to (092) Floor End.
I:
On the inside of the assembly attach (093) Door Bottom to the bottom of (061) Door Wall Window Panel with 8
(S20) #8 x 1-3/8” Wood Screws, as shown in fig. 9.14 and 9.15.
Fig. 9.12
062
Fig. 9.13
Fig. 9.14
Fig. 9.15
064
092
093
S20
093
061
S4
061
Flush
5/8”
Parts removed for clarity
5/16” T-Nut
S15
S4
S4
S15
56
support@cedarsummitplay.com