53
•
CEDIMA
® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
Appendix
ENGLISH
10.0 Terms of warranty
1.
The supplier must be notified in writing of any evident defects in the machine within 14 days of
receipt. If this period has expired or if the machine in question has been operated or worked on, the
machine shall be considered as accepted by the purchaser. Hidden defects are to be notified in writing
immediately on discovery, at the latest however within 6 months of receipt of the machine.
2.
We guarantee the agreed usability of the device delivered by us for a period of 12 months. This
term begins on the day the device arrives with the buyer. Irrespective of this, our obligation shall be
considered as fulfilled, as soon as the goods are dispatched from our works/warehouse. In no case do
we assume a producer´s guarantee. The mandatory regulations of the law for product liability remain
untouched.
3.
Wearing parts are subject to a limited warranty. Wearing parts are parts subject to operation-related
wear during proper use of the device. The rate of wear cannot be uniformly defined and differs accord-
ing to the intensity of use. The wearing parts must be adjusted, maintained and, if necessary, replaced
for the specific device in accordance with the manufacturer ´s operating manual. Operation-related
wear is not a reason for claims to defects.
Wearing parts for the construction devices mentioned in the operating manual such as core drilling
and sawing machines and special machinery as well as related general assemblies (if available):
– Feed and drive elements such as toothed racks,
gearwheels, pinions, spindles, spindle nuts,
spindle bearings, wires, chains, sprockets, belts
– Seals, cables, hoses, packings, plugs, couplings
and switches for pneumatic, hydraulic, water,
electricity, fuel systems
– Guide elements such as guide strips, guide
bushes, guide rails, rollers, bearings, sliding
protection supports
– Clamping elements for quick-release systems
– Flushing head seals
– Slide and roller bearings that do not run in an
oil bath
– Shaft oil seals and sealing elements
– Friction and safety clutches,
braking devices
– Carbon brushes, collectors / armatures
– Consumable operating materials
– Easy-release rings
– Control potentiometers and manual
switching elements
– Securing elements such as dowels, anchors,
screws and bolts
– Fuses and lamps
– Bowden cables
– Disks
– Diaphragms
– Spark plugs, glow plugs
– Parts of the reversing starter such as the start-
ing rope, starting pawl, starting roller and
return spring
– Sealing brushes, rubber seals, splash protection
cloths
– Filters of all types
– Drive and guide wheels/pulleys and associated
rubber tyres
– Cable wire protection elements
– Drive and travel wheels
– Water pumps
– Cut-material transport rollers
– Drilling, separating and cutting tools
– Energy storage devices.
Page 1 of 2 pages
Summary of Contents for CF 13.3 B
Page 55: ......
