ENGLISH
3
•
CEDIMA
® • Technical Documentation • All rights reserved acc. to ISO 16016 • Changes serving technical progress reserved •
EC Declaration of Conformity
Manufacturer
CEDIMA
®
Diamantwerkzeug- und Maschinenbaugesellschaft mbH
Lärchenweg 3, D-29227 Celle
Collection and storage of the technical documentation:
Technical documentation of
CEDIMA
®
Diamantwerkzeug- und Maschinenbaugesellschaft mbH,
Siedemeierkamp 5, D-29227 Celle
Machine description:
Joint Cutter CF-22 E.800
Walk-behind hand-guided for wet cutting in asphalt and concrete as well as similar abrasive construction
materials with diamond saw blades up to 800 mm in diameter. Cutting drive motor driven by V-belts
connected to a 7.5 kW electric motor. Max. cutting depth 320 mm, steplessly adjustable via motor cutting
shaft rocker and threaded rod. Right- or left-side cutting possible. Compressed water supply via GEKA
connection and adjustable shut-off valve. Can be dismantled into 3 modular parts for transport.
Measured sound pressure level: LWA = 94 dB (A)
Guaranteed sound pressure level: LWA(d) = 98 dB (A)
Procedure of conformity evaluation: RL 2000/14 EC, Annex V
Hereby we confirm that in the sense of EC Directive 2006/42/EC, Annex II A dated 2006-05-17
(modifications inclusive) of the European Parliament and the Council
The joint cutter
CF-22 E.800
as of year of manufacture 2019
complies with the following harmonised standards and EU Directives:
EN ISO 12100–1, EN ISO 12100–2, EN 13862, EN ISO 14121-1, EN 60204-1, 2000/14/EG, 2002/96/EG
In regard to dangers due to electricity, according to Annex I No. 1.5.1 of the Machinery Directive
2006/42/EC, the protective aims of the Low Voltage Directive 2006/95/EC (formerly 73/23/EEC) are met.
In regard to dangers due to radiation, according to Annex I No. 1.5.10 of the Machinery Directive
2006/42/EC, the protective aims of the EMC Directive 2004/108/EC (formerly 89/336/EEC) are met.
This declaration of conformity immediately becomes invalid if changes are incorporated into the
machine which have not been approved by us!
Celle, 14 May 2019
Bob Siemsen (CEO)
