ENGLISH
6
•
CEDIMA
® • Technical Documentation • All rights reserved acc. to ISO 16016 • Changes serving technical progress reserved •
Technical specifications and accessories
Joint Cutter CF-22 E.800
1.2
Vibration acceleration values, hand-arm vibration
Equivalent total vibration value a
hv, eq
< 2.50 m/s²
Measurement uncertainty K
m/s²
The given values can vary depending on the operating conditions (material to be cut, state of the machine, handling, user,
diamond tools in use, etc.).
When determining the daily vibration load A (8) acc. to DIN EN ISO 5349-2, the real effective time that can be significantly
influenced (reduced) by idle times must be considered. Idle times include times for fuelling, water supply, tool change,
machine set-up and transport, securing the location of operation/use.
Measurement uncertainty acc. to DIN EN 12096.
DANGER
Risk of injury when exceeding the daily maximum vibration load!
When working continuously with the CF-22 E.800, the maximum daily limit is not reached (LärmVibrationsArbSchV).
1.3
Accessories supplied
1 x open-ended spanner size 36
1 x open-ended spanner size 18
1 x open-ended spanner size 13
1 x operating manual
For damage resulting from using accessories that are not in accordance with CEDIMA®, we will refuse any liability.
For information about selecting the correct diamond saw blade, refer to the current price list and the current joint
cutter brochure.
For special applications, please ask CEDIMA® directly.
For further accessories, refer to the current CEDIMA® price list.
