•
CEDIMA
® • Technical Documentation • All rights reserved according to ISO 16016 • Changes serving technical progress reserved •
EC Declaration of Conformity
Manufacturer:
CEDIMA
®
Diamantwerkzeug- und Maschinenbauges. mbH
Lärchenweg 3, D-29227 Celle/Germany
Collection and storage of the technical documentation:
Technical documentation of
CEDIMA
®
Diamantwerkzeug- und Maschinenbauges. mbH
Siedemeierkamp 5, D-29227 Celle/Germany
Machine description:
Walk-behind hand-guided for wet cutting in asphalt and concrete as well as similar abrasive
construction materials with diamond saw blades up to 700 mm diameter in left or right cutting.
Cutting shaft drive via V-belts with a 7.5 kW electric motor. Maximal cutting depth of 270 mm
progressively and firmly adjustable via frame rocker and threaded rod. Pressurised water supply
provided by GEKA-connection and adjustable shut-off valve. Dismountable in 3 modules for transport.
Measured acoustic power level: LWA= 94 dB (A)
Guaranteed acoustic power level: LWA(d)= 98 dB (A)
Procedure for assessing the conformity: RL 2000/14/EC, Appendix V
Hereby we confirm that in the sense of EC Directive 2006/42/EC, Annex II 1.A dated 2006-05-17
(modifications inclusive) of the European Parliament and the Council
the joint cutter
CF
•
22
E
from the year of manufacture 2009
complies with the following harmonised standards and EU Directives:
EN ISO 12100-1, EN ISO 12100-2, EN 13862, EN ISO 14121-1, EN 60204-1, 2000/14/EC, 2002/96/EC
In regard to dangers due to electricity, according to Annex I No. 1.5.1 of the Machinery Directive
2006/42/EC, the protective aims of the Low Voltage Directive 2006/95/EC (formerly 73/23/EEC) are
met.
In regard to dangers due to radiation, according to Annex I No. 1.5.10 of the Machinery Directive
2006/42/EC, the protective aims of the EMC Directive 2004/108/EC (formerly 89/336/EEC) are met.
This declaration of conformity immediately becomes invalid if changes are incorporated to the
machine which have not been approved by us!
Celle, 2016-09-21
Bob Siemsen (managing director)
