Issue 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
5
1.0 INTRODUCTION
The practices in this manual provide installation and maintenance information for
Model WPP-531-D-RP-ADA-STROBE speakerphone, equipped with SPK107UNVLr1
firmware.
The information in this manual is subject to change without notification.
For information not included in this manual, please call or write:
CEECO
Communication Equipment & Engineering Company
Customer Service
519 W South Park Street
Okeechobee, FL 34972
863-357-0798- telephone
863-357-0006- facsimile
info@ceeco.net
www.ceeco.net
2.0 GENERAL
DESCRIPTION
2.01
The CEECO Model WPP-531-D(EMER)-RP-ADA-STROBE Telephone is a
sturdy, hands free, vandal resistant, speakerphone. The telephone is constructed
with a stainless steel panel and an aluminum weatherproof housing. This
telephone comes with an optional ADA feature (red/green LED) giving visual
feedback during periods of operation. It also comes with an optional blue strobe
light, which operates off of AC power and activates when a call is made with the
phone. Instead of a hookswitch and handset, the telephone has a Press-To
Start/Press-To-Stop (CALL) button for the initiation and termination of phone
calls.
2.02
The CEECO telephone is equipped with an auto-answer feature to allow remote
programming of features, and remote monitoring for “listening” to the room or
area in which the CEECO telephone is installed.
2.03 The microphone is muted during periods of dial tone to deter the use of
fraudulent hand-held dialers.
2.04 Incoming calls may be allowed or blocked depending on the programming.
2.05
Programming is accomplished via the DTMF programming keypad.
2.06
The telephone also has an automatic call disconnect feature, which allows a
selection of 1-9 minutes. When a call is made, the phone will automatically
disconnect the call upon the expiration of the selected time.
2.07
The telephone will also automatically reset after receiving a wink back
(momentary open) on the telephone line.
