Issue 4.0
CEECO
Communication Equipment & Engineering Company
PROPRIETARY
7
PROGRAMMING CONTINUED…
3.05
Press the CALL button
and wait for dial tone to begin programming.
3.06
Utilizing the programming keypad,
enter # 9 7 # 1 8 # to clear all
user
programmable memory locations.
NOTE:
Once the # key has been entered, an operator reorder signal, fast
busy tone or other central office signals may be heard. Please
disregard these sounds and continue programming, as they will have no
affect on the programming.
3.07
If the telephone must dial a
PBX or other access number
to begin a call,
enter
# 0 2 followed by the desired
number.
If this is not a desired feature, please
proceed to section 3.07.
This PBX/Access number may range from 1-11 digits.
When the CALL button is pressed the telephone will automatically dial the
PBX/Access number first, followed by an approximate one (1) second pause,
and then dial the auto-dial number (programmed in the next section-3.07). A
“1” must be entered under Digit 9 in section 3.08 in order to activate this
feature.
EXAMPLE:
Enter
# 0 2
9. This will cause the phone to automatically dial the
number “9”, when the CALL button is pressed. This will be
followed by an approximate one (1) second pause and then the
auto-dial number will be released.
#02 __ __ __ __ __ __ __ __ __ __ __
3.08
In order to program the
auto-dial number, enter # 0 1, followed by the desired
number.
This number may range from 1-11 digits. When the CALL button is
pressed, this number will automatically dial out. Any PBX/Access number
previously programmed will dial out first, followed by an approximate one (1)
second pause, followed by this auto-dial number.
Example:
Enter
# 0 1
5 5 5 1 2 1 2. This will program the telephone to
automatically dial the number 555-1212, when the CALL button
button is pressed.
#01 __ __ __ __ __ __ __ __ __ __ __
3.09
If a
Second Auto-Dial Number
is desired,
enter # 1 9 followed by the desired
second number
. This number will automatically dial out after the selected
number of unanswered rings of the first number. The number of unanswered
rings is selected under Digit 6 in the next section of programming-3.9.
Example: Enter #197771313. During programming in the next section (3.9),
enter a “2” for Digit 6. This will program the phone to automatically dial the
