10/27
5.6 Forward drive
The forward drive propels the item through the machine. The backpressure rollers ensures that the item
don’t ”drift” on the 4 forward drive rollers. The pressure on the backpressure rollers is spring-loaded. The
height on these rollers can be adjusted by loosen the star handle and moove the backpressure roller
and the frame up or down.
5.7 Test run and flow rate
1.
Pull the item out.
Close the lid.
Check that the bucket containing wood protection is underneath the outlet pipe, and that the suction and
excess pressure hose are placed in the bucket. Close the lid on forward drive and brushes.
Position the main switch on the control panel to "I" (power is connected). Activate the button "PUMP"
and the pumps will begin to pump. Spraying may occur.
Ensure that all valves (pos. 9011-20593) are closed. Adjust the nozzles to the desired position. Adjust
the fluid amount using the nozzle valves.
Be aware of not to apply to much wood treatment, as this can lead to dripping finished items and/or
”runners” on the items.
Always open the upper nozzle first. The machine can treat 1 or 2 sides of the item at the same time.
Only open fluid nozzles for those sides that are to be treated.
2.
Activate the "FORWARD DRIVE" button and adjust the forward drive to the desired speed. The flow
rate can be varied steplessly, and be regulated by turning the spindle using the handle.
Turning clockwise: Slower speed
Turning anti-clockwise: Faster speed
3.
Activate the button ”Børster/Brushes” and adjust the brush pressure as previously described.
Feed the item into the inlet and check that the forward drive is running evenly.
If forward drive is not running evenly, adjust the back pressure roller.
The item can stop moving if it hits nozzles or brushes. In that case they should be re-adjusted.
Test drive with the same item 2-3 times. This ensures that the brushes get wetted. Then make a test
drive with a new item. If the result is fine, production can start. The items should be controlled regularly,
to ensure a satisfying result.
