5/27
2. Safety Instructions
Important:
The following safety instructions must be adhered to for reasons of personal safety.
All users must be familiar with these user instructions. Read thoroughly before use to
know the machine functions entirely.
2.1 Use of machine
The machine is only to be used for treating wood with water and oil based wood protection products. The
machine is not intended as washing- or cleaning machine, using chemicals for degreasing, removal of
paint etc
Do not use the machine with particular dangerous, unhealthy or flammable liquids.
Do always comply with the instructions given in the supplier directions of the used substances.
Misuse may lead to strangling, unconsciousness, brain damage, fire or explosion followed by combustion
etc.
The machine is not constructed to be used in ATEX zone classified areas, and must
NOT
be used in zone
classified surroundings.
2.2 Clothing
Avoid loose fitting clothing and loose, dangling hair when operating the machine.
2.3 Personal protective equipment
Use rubber gloves and eye protection when adjusting and cleaning the machine.
The operator that receives treated items from the machine must wear rubber gloves.
Choice of protective equipment should follow the recommendations from the supplier directions of the
used paint.
2.4 Fluids
The used fluids – paints or cleaning products – must have a flash point at min. 10° C. above the
surrounding temperature. Do not use liquids with a flash point lower than 40° C due to the risk of fire.
Attention:
Use eye protectors and gloves when operating the machine. By accidents the operator is to act according
to the supplier directions of the used paint.
It is therefore important that this product information is available and is known and scrutinized!
