6/27
2.4.1 Water based wood protection
E.g.: Tintex Tinova VX, Ready V40, produced by Akzo Nobel. Gori 11, Gori 356, Gori 410, Gori 411, Gori
413, Gori 417, Gori 892, Gori 894 all produced by Dyrup A/S.
2.4.2 Oil based paint
E.g.: Gori 22 wood primer, Gori 44 wood protection, Gori 88 semi-/full coverage wood protection, Gori
wood oil, Gori outdoor wood treatment, Gori 400, Gori 541, all produced by Dyrup A/S.
Fluids with a flash point lower than 40° C may not be used due to the risk of fire.
2.5 Room temperature
When using oil-based products, room temperature must not exceed 29° C, and it must stay minimum 10°
C below the flashpoint of the used fluids/paints due to the risk of fire.
Note: Oil based products do not bind optimally when applied at a room temperature exceeding 25° C.
2.6 Ventilation
The machine should only be used in well-ventilated rooms or outdoors if convenient. Moreover attention
about ventilation should be paid to the supplier recommendations of the used paints/fluids.
Treated items should be placed for drying in a ventilated place to avoid any obnoxious effects from the
solvents.
2.7 Risks during use
Keep hands, etc., away from the machine inlet when the machine is running to avoid the risk of crushing.
Likewise hands etc. should be kept away from the outlet, also here is there a risk of crushing.
2.8 Moving the machine
The machine can be moved around on the mounted rubber-wheels or by forklift. Before moving the
machine it must be checked that all fluids are drained off.
When moving by forklift: Be aware that the forklift lifts under the contrived lifting marks.
When moving manually: Be aware that all needless gear has been taken out of the machine, and the
machine is in god balance. Never try moving the machine manually on hilly ground.
