User Instructions for Commodes
T304
– T306 – T317 – T58 – T59 – T60
Ref: Commodes May 2020
Form No: Cef 0035
Detachable Arms (T58 Only)
Using both hands remove each commode arm by lifting squarely from their
fixing sockets. To refit the arms, carefully locate both ends into the fixing
sockets and push fully down.
Cleaning
This product can be cleaned using a mild detergent and a mild disinfectant or
antibacterial solution. The framework should be wiped down on at least a
weekly basis. Caution must be taken to understand the suitability of cleaning
agents/chemicals being used.
Do not use an abrasive cleaner as this may damage the frame and invalidate
your warranty.
It is recommended that the potty is thoroughly cleaned after every use, using
an appropriate cleaning agent.
Use of power/jet washing & industrial washing machines
If either of the above is used to clean equipment care must be taken since
high-pressure water can be penetrative.
Care should be taken that frames are not placed too close to high-pressure
water jets.
After cleaning ensure any residual water is removed from the framework as it
could cause permanent rusting of the frame (leave frames open in a warm
environment for several hours to ensure all internal moisture evaporates).
We cannot offer advice on industrial washing machines with regards to
specific machine settings, as these will be dependent
on the manufacturer’s
instructions.
Maintenance Requirements
The product should be checked on a regular basis for damage or wear and
tear
– this includes flaking or cracking paint. Any undue signs of damage
should be noted and reported to the supplier in the first instance. Should
damage be evident, then the user should refrain from using the product until
advice has been sought from the supplier.
