background image

   02PN8 HI-PE/CF --- Rev. F044GB60K10

9

V - Technical characteristics

Main characteristics

 

Adjustable sensitivity with wide range of settings.

 

International standards: Direct selection of International Security Standards.

 

Extremely high discrimination.

 

Extremely high immunity to both mechanical and electromagnetic interference.

 

Programmable operation controlled by microprocessor.

  Programming: via incorporated keypad and display or via RS232/RS485 serial link from a personal

computer or computer network.

 

Access to programming protected by mechanical lock and two alphanumeric passwords.

  Automatic, cable-free synchronisation between two or more metal detectors, at a minimum distance of

5cm from each other.

 

Highly integrated, highly reliable professional electronics.

 

Electronics control unit separate from the detector.

 

No initial or periodic calibration.

 

Easy maintenance. The electronics unit can be replaced in less than one minute.

 

Colour: light grey, RAL 7040

Alarms

 

Audible signal: Buzzer - 90 dBA (1 m).

 

Relay output: Switch contact NA, NC, C - 1 A - 24 Vdc.

 

Reset: PP input, automatic or manual, N.C. contact.

 

Inhibition: INI input, N.A. contact.

 

Self-diagnosis: Incorporated, with intermittent audible signal.

Certification and compliance

 

Harmless to wearers of pacemakers, life-support systems, pregnant women and magnetic media (floppy
disks, audio-cassettes, video-cassettes and similar).

 

Complies with NILECJ-0601-00 standards for all security levels.

  Complies with EC regulations and international standards on electrical safety and electromagnetic

compatibility (EMC).

Installation data

 

power supply: 20 ÷ 30 Vdc, 25VA max.

 

Inputs: RS-232C interface for connection to a terminal, computer or external modem; RS-232C interface
for  connection to other CEIA Metal Detectors.

 

Temperature and relative humidity: from -15°C to +70 °C; from 0 to 95% (without condensation)

 

Dimensions and weight of the electronics unit: 380 x 157 x 82 mm / 1.2 kg.

Accessories / Options
Metal test samples.

Summary of Contents for HI-PE/CF












Reviews: