background image

 14  Appendices 

 

 

 

 

FI100K0025v1100 UK - -  PD240CH

 

 

 

 

4 Appendices 

4.1 Specifications 

POWER SUPPLY 

Metal Detector: 2 x AA size Ni-MH, 2500mAh rechargeable 
batteries 

HHDS-CH AC/DC adapter: 100-240V~, 50-60Hz, 175 mA 
max. 

CONTROL PANEL  

Optical, acoustic and vibratory alarm modes 

3-level analysis mode selection buttons: 

  All Metals (magnetic and non magnetic metals) 

  Body (small magnetic metals) 

  Head (very small magnetic metals) 

DETECTION AND 
OPERATIONAL FEATURES 

Customizable via HHMD Configuration tool  

BATTERY 

Battery life (AA NiMH batteries 2500mAh):  
All Metals: > 50 hours 

Body: > 18 hours 

Head:  > 20 hours 

Low battery indicator 

OPERATING 
TEMPERATURE 

-40°C … +70°C (-35°F to 158°F) 

STORAGE TEMPERATURE 

-40°C … +80°C (-35°F to 176°F) 

RELATIVE HUMIDITY 

0…98% (without condensation) 

DIMENSIONS 

PD240CH

: 405mm x 120mm x 40mm (15.9" x 4.7" x 1.6") 

HHDS-CH

: 175mm x 115mm x 85mm (6.9" x 4.5" x 3.4") 

Carry Bag

: 430mm x 340mm x 105mm (16.9" x 13.4" x 4.1”) 

WEIGHT  

PD240CH

(with battery): 460g (1.05 lbs) 

HHDS-CH

 (with power adapter): 755 g (1.66 lbs) 

Carry Bag

: 1.33 kg (2.9 lbs) 

MANUFACTURED IN SHOCK-RESISTANT TECHNICAL POLYMERS

 

COMPLIANCE 

Conforms to the international standards currently applicable 
for safety, EMC and to the applicable CE regulations 

Warranty 

The warranty on all CEIA products, extended to the period agreed with the Sales Department, is applicable to 
goods supplied from our factory, and for every constituent part thereof, with the exception of the batteries. Any 
form of tampering with the device, and in particular opening its container, is strictly forbidden and will 
invalidate the warranty. 
 
 

Customer Satisfaction Report 

C.E.I.A.  objective is the maximum quality of products and services offered to the customer. Any comments 
and suggestions useful for achieving this objective will be highly appreciated and can be sent to us by 
compiling and returning the form available at: 
 

 http://www.ceia.net/security/satisfaction 

Summary of Contents for PD240CH





















Reviews: