10. SPECIFICATION
TECHNICAL DATA
Transmission Parameters
Net/ Interface
ETHERNET
Current Loop
Connector
RJ45
Screw terminal, wire max. Ø 2,5mm
2
.
Max. Line length
LAN up to 150 m
Depend on baud rate, up to few kilometres
Max. baud rate
10/100 Mbit/s
Do 38,4 kbps (depend on current loop line
length)
Transmission line
4-pair twisted cable, UTP 4x2x0,5
(24AWG), shield inside large
interferences STP 4x2x0,5 (24AWG)).
2-pair twisted cable eg UTP Nx2x0,5
(24AWG), shield inside large interferences
eg STP Nx2x0,5 (24AWG).
Standards
IEEE 802.3
current signal, 0-20mA (TTY)
Transmission type
Current Loop asynchronous half duplex or full duplex
Optical Signalization
•
PWR – green LED power supply,
•
RX - red LED data receiving from Current Loop side,
•
TX - yellow LED data transmission through Current Loop interface.
Electrical Parameters
Power requirements
10 - 24 – 30 V DC
Power Cable
Recommended length – up to 3m
Power
3W
Protection from reverse power polarization
yes
Galvanic Isolation
1kV= or 3kV= (between power circuit and ETHERNET signal line)
1kV= or 3kV= (between power circuit and Current Loop signal line)
Optoisolation
~3kV= (between signal lines Current Loop and ETHERNET)
Electromagnetic compatibility
Resistance to disruptions PN-EN 55024.
Emission of disruptions PN-EN 55022.
Safety requiring
According to the PN-EN60950 norm.
Environment
Commercial and light industrial.
Environmental Parameters
Operating temperature
-30 ÷ 60°C
Humidity
5 ÷ 95% - non-condensing
Storage temperature
-40 ÷ 70°C
Casing
Dimensions
53mm x 90mm x 62mm
Material
PC/ABS
Degree of casing protection
IP40
Degree of terminal protection
IP20
Weight
0,10 kg
According to standards
DIN EN50022, DIN EN43880
Location during work
Free
Mounting method
On the rail compliant with DIN35 / TS35 standard.
25
ADA-13021
Summary of Contents for ADA-13021
Page 26: ...26 ADA 13021...
Page 27: ...27 ADA 13021...
