5.2.2.1.5.2. CONFIGURATION FOR COMMUNICATION WITH MODBUS-SLAVE TYPE
DEVICE
In section
Industrial Automation Settings
, press
[Change Protocol]
link. Then in section
Select IA Protocol
(figure below) select
type of device, connected to serial port of ADA-13021MG as
Serial Slave
and MODBUS-RTU or MODBUS-ASCII protocol for
communication between connected devices. Press
[Apply]
for saving configuration.
Fig. 30. Example configuration for communication with MODBUS-SLAVE devices – choice of devices and protocols
Set options in section
[Modbus RTU Settings]
eg. As on picture below. Press
[Apply]
for saving configuration.
Fig. 31. Example configuration for communication with MODBUS-SLAVE devices – Modbus RTU setting
25
ADA-13021MG
