3.2.2. CONNECTING FOR REALPORT MODE OPERATING
Fig. 4 (above) and 5, 6 below show how correctly connect the ADA-13028L to LAN, WAN network or PC to operating in virtual serial
port mode (RealPort).
For direct connection of the converter to PC network adapter, use the cross-over cable (see Table 2) and for connection by the use of
switch or HUB use the straight cable (see Table 1).
Fig 5. Connecting for Real Port mode functioning via switch or Hub for LAN network
Fig 6. Connection for operating in Real Port mode for WAN network
8
ADA-13028L
Devices with
Current Loop
CLO interface
Computer with a
network adapter
Static IP address
ADA-13028L
Static IP address
ETHERNET
Straight cable
(Table 1)
Local Network
ETHERNET
base on switch
CLO bus
Devices with
Current Loop
CLO interface
Computer with a
network adapter
Static IP address
ADA-13028L
Static IP address
ETHERNET
Straight cable
(Table 1)
CLO bus
ROUTER
Public IP address
INTERNET
ETHERNET
Straight cable
(Table 1)
ROUTER
Public IP address
