Read/Write Self -
permission to read and write own setting, but not other users.
Read All/Write Self -
permission to read the setting for all users and modify only own setting (not other users).
Execute -
permission to execute (start).
4. All changes are saved by pressing
[Apply]
.
5.2.5. MANAGEMENT
On left panel in menu
Management
are to sections :
- Serial Ports
- Connections
5.2.5.1. SERIAL PORTS MANAGEMENT
Section
Serial Ports
allows to identification connections/disconnection to the serial port of the converter through the network.
5.2.5.2. CONNECTIONS MANAGEMENT
Section
Connections
allows to identification connections/disconnection to the converter through the network.
5.2.6. ADMINISTRATION
The menu
Administration
allows :
–
to delete/upload files with Java applet,
–
to backup/restore configuration of converter,
–
to update Firmware,
–
to restore the factory default settings,
–
to display system details information,
to reboot the converter.
5.2.6.1. FILE MANAGEMENT
Section
File Management
enables upload and delete Web provided by manufacturer. Uploaded index.htm or index.html allows to
automatically run the page in the web browser after entering
http://ip-converter-address/FS/WEB/index.htm
and login to
ADA-
13110MG.
5.2.6.2. BACKUP & RESTORE CONFIGURATION
Section
Backup/Restore
enables backup to file or restore from file the user configuration of the converter.
5.2.6.3. FIRMWARE UPDATE
Section
Update Firmware
enables to make the update firmware from the file. Firstly should be done update the POST software before
updating the firmware – more details available on the web page
5.2.6.4. FACTORY DEFAULT SETTINGS
The converter was configured by the manufacturer.
To restore factory default settings, select from menu
Factory Default Settings
. After that the converter will automatically reboot.
5.2.6.5. SYSTEM INFORMATION
Section
System Information
displays:
-
General
– device model, MAC address, firmware version, Boot version, POST version and more.
-
GPIO
– not applicable in ADA-13110MG.
-
Serial
– port description, current settings of serial port, status of controlling lines and the statistics data transfer through serial port.
-
Network
– show statistics of ETHERNET interface for IP, TCP, UDP, ICM protocols.
5.2.6.6. REBOOT
Section
Reboot
allows making software reset of ADA-13110MG. Pressing [
Reboot
] will start rebooting of server during 1 min.
5.2.6.7. LOGOUT – ENDING MANAGEMENT AND CONFIGURATION
After completion of the configuration or administration should be pressing
Logout
on left panel – logout from WWW server of ADA-
13110MG converter.
6. USING VIRTUAL PORT SERVICE [REALPORT]
6.1. VIRTUAL PORT DRIVER INSTALLATION IN WINDOWS XP
-Drivers/Win-98-ME, for Windows 98, Windows 98SE, Windows ME,
-Drivers/Win-2000, for Windows2000,
-Drivers/Win Server-2003-2008-2012 for Windows Server 2003, 2008, 2012,
-Drivers/Win-Vista for Windows Vista.
-Drivers\Windows\Win XP-7-8-8.1-10 for Windows XP, 7, 8.x, 10.
Installation of Virtual serial port drivers is as follows:
1. Connect ADA-13110MG to ETHERNET (see p.3.2.1) and power (see p.3.2.6),
2. Press [
Start
] and select [
Run...
],
3.
In the dialog window [
Run
] press [
Browse
],
4. Select „
My computer
” and CD-Rom with „
ADANET_DRV
”,
5. Select catalog
Drivers/WinXP2003Vista_x86_x64,
6. Select file „
Setup32.exe
” for 32-bits system or „
Setup64.exe
” for 64-bits and press [
Open
],
24
ADA-13110MG
