10. SPECIFICATION
TECHNICAL DATA
Transmission Parameters
Interface
RS-232
RS-485/RS-422
Connector
Screw terminal block - max. Ø 2,5mm
2
Screw terminal block - max. Ø 2,5mm
2
Line length
up to 15 m
1200 m
Max. number of connected device
1
32
Transmission line
Multi-wire cable 9x0,34 in shield
1-pair or 2-pair twisted cable, UTP
Nx2x0,5 (24AWG), shield inside large
interferences STP Nx2x0,5 (24AWG)
Standards
EIA-232, CCITT V.24,
EIA-485, CCITT V.11
Transmission type
Asynchronous full duplex, half duplex.
Optical Signalization
•
PWD – green LED power supply,
•
RX - red LED data receiving on RS-232 side,
•
TX - yellow LED data transmission via RS-232 interface.
Electrical Parameters
Power requirements
10 - 24 – 30 V DC
Power Cable
Recommended length of power cable – up to 3m
Power
<2W
Protection from reverse power polarization
YES
Galvanic Isolation
2-way or 3-way on the level 1kV= or 3kV= DC between power circuit and RS-
485/422 signal line
Optoisolation
3kV= between signal line RS485/422 and RS-232
Electromagnetic compatibility
Resistance to disruptions according to the standard PN-EN 55024.
Emission of disruptions according to the standard PN-EN 55022.
Safety requiring
According to the PN-EN60950 norm.
Environment
Commercial and light industrial.
Environmental Parameters
Operating temperature
-30 ÷ +60°C
Humidity
5 ÷ 95% - non-condensing
Storage temperature
-40 ÷ 70°C
Casing
Dimensions
53 x 90 x 62 mm
Material
Noryl UL. 94 V-O
Degree of casing protection
IP40
Degree of terminal protection
IP20
Weight
0,10 kg
According to standards
DIN EN50022, DIN EN43880
Location during work
Free
Mounting
Rail mounting according to DIN35 standard / TS35.
14
ADA-4010A
Summary of Contents for ADA-4010A
Page 15: ...15 ADA 4010A...
