Product Code
Battery operating voltage
Battery makeup
Battery Capacity (Ah)
Dimensions (H, L, W)
Weight
- PH10
- 18V (5 cells)
- Lithium Ion (Li-ion)
- 1.3Ah (1300mAh)
- 185x115x85mm
- approx. (7.3x4.3x3.3")
- 560g (1.3lbs)
- PH11
- 18V (5x2 cells)
- Lithium Ion (Li-ion)
- 2.6Ah (2600mAh)
- 185x115x85mm
- approx. (7.3x4.3x3.3")
- 780g (1.8lbs)
Product Code
Battery operating voltage
Battery makeup
Amp hours (Ah)
Dimensions (H, L, W)
Weight
User Manual
POWER
handle
PH 0-
Technical Specifications
If you experience any problems with the product please contact
email: service@cel-global.com
phone UK: +44 8453 889769
phone US: +1 800 233 7592
www.cel-global.com
READ INSTRUCTION MANUAL
GENERAL HAZARD
SAFETY ALERT
KEEP BYSTANDERS AWAY
© Copyright C Enterprise Limited 2010
C Enterprise Limited www.cel-global.com info@cel-global.com
UK
HK
USA
China
Europe
Australia
Japan
•
•
•
•
•
•
C Enterprise Ltd
POWERhandle refers to the battery pack, use of the word
battery or batteries refers to the non-removable cells contained
within the POWERhandle.
WARNING,
Switch
off
and
remove
the
POWERhandle
before
carrying
out
any
maintenance
on
your tools.
Lithium Ion batteries are protected by a circuit which
prevents them from over discharge, this circuit can be
damaged by impact, take care not to drop your
POWERhandle.
Overload Protection
When overloaded (e.g.: the product is working too hard or the
blade is jammed) the current will increase rapidly, this triggers
the auto cut-off, indicated by a RED flashing LED. Free the
obstruction and restart the tool.
NOTE,
PH10 is designed for low current applications, the
circular saw will perform much better with the PH11.
Low Voltage Protection
When the discharging current is too high or the remaining
battery voltage is not enough to drive the machine, the battery
will cut out automatically and the LED lights will go out.
Note:
If this happens frequently the battery capacity is low,
please recharge your battery.
No Memory Effect
Lithium Ion batteries can be recharged at any time during their
use, there is no need to completely discharge the battery before
recharging. You can use the battery for 5 minutes and place on
charge with no detrimental effects. Additionally there is no need
to wait for the battery to fully charge before removing from the
charger.
Maintenance
General
inspection
Regularly
check
that
all
the
fixing
screws
are
present and
tight.
They
may
vibrate
loose
over
time.
Dust
Keep
the
POWERhandle
air
vents
unclogged
and
clean
at
all
times.
Remove
dust
and
dirt
regularly.
Cleaning
is
best
done
with
compressed
air
or
a
rag.
Never
use
caustic
agents
to
clean
plastic
parts.
CAUTION,
Do
not
use
cleaning
agents
to
clean
the
plastic
parts
of
the
POWERhandle.
A
mild
detergent
on
a
damp
cloth
is
recommended.
Water
must
never
come
into
contact
with
the
POWERhandle.
WARNING,
Do
not
throw
used
batteries
into
fire
or
water,
It
could
cause
an
explosion
!
WARNING, Batteries contain harmful chemicals, dispose of
damaged batteries safely.
WARNING,
Do
not
use
an
extension
cord to charge.
WARNING,
Charge
indoors
only.
Store
the
POWERhandle,
instruction
manual
and
accessories
in
a
secure,
dry
place.
In
this
way
you
will
always
have
all
the
information
and
parts
ready
to
hand.
Never store the POWERhandle with a flat battery.
The battery should ideally be stored between 10ºC and
24ºC (50ºF) and (75ºF).
Please
dispose
of
batteries
at
your
local
battery
disposal
depot.
This product contains no user serviceable parts. Repairs
should only be carried out by a
CEL
authorised repairer.
18V
Manual Version: 101020 - Designed and edited in the UK - Printed in China
KEEP DRY
