celcus CEL-48UHDSB, Manual

English

   - 8 -

Switching On/Off

To Switch the TV On

Connect the power cord to a power source such as a 

wall socket (220-240V AC, 50 Hz). 
To switch on the TV from standby mode either:

• 

Press the “ ” button, 

Pro/-

 or a numeric 

button on the remote control.

• 

Press the “ ” button or 

Pro/-

 on the TV.

The TV will then switch on.

To Switch the TV Off

Press the “ ”

button on the remote control or press 

the “ ”

button on the TV, then the TV switches into 

standby mode.

To power down the TV completely, unplug the 

power cord from the mains socket.

Note:

 When the TV is switched into standby mode, the 

standby LED can blink to indicate that features such as 

Standby Search, Over Air Download or Timer is active. The 

LED can also blink when you switch on the TV from standby 

mode.

First Time Installation

When turned on for the first time, the language 

selection screen is displayed. Select the desired 

language and press 

OK

.

On the next screen, set your preferences using the 

directional buttons.

Note:

 Depending on the 

Country

 selection you may be asked 

to set and confirm a PIN at this point. The selected PIN cannot 

be 0000. You have to enter it if you are asked to enter a PIN 

for any menu operation later.

About Selecting Broadcast Type

Digital Aerial:

 If 

Aerial

 broadcast search option is 

turned on, the TV will search for digital terrestrial 

broadcasts after other initial settings are completed.

Analogue: 

If 

Analogue

 broadcast search option is 

turned on, the TV will search for analogue broadcasts 

after other initial settings are completed.
Additionally you can set a broadcast type as your 

favourite one. Priority will be given to the selected 

broadcast type during the search process and the 

channels of it will be listed on the top of the 

Channel 

List

. When finished, press 

OK

 to continue.

You can activate 

Store Mode

 option at this point. 

This option will configure your TV’s settings for store 

environment and depending on the TV model being 

used, the supported features of it may be displayed 

on the top of the screen as an info banner. This option 

is intended only for store use. It is recommended to 

select 

Home Mode

 for home use. This option will be 

available in 

System>Options>More

 menu and can 

be turned off/on later. 

Press 

OK

 button on the remote control to continue 

and the 

Network/Internet Settings

 menu will be 

displayed.  Please refer to 

Connectivity

 section to 

configure a wired or a wireless connection. After the 

settings are completed press 

OK

 button to continue. 

To skip to the next step without doing anything press 

the 

Rapid advance

 button on the remote.

After the initial settings are completed TV will start 

to search for available broadcasts of the selected 

broadcast types.
After all the available stations are stored, scan results 

will be displayed. Press 

OK

 to continue. The 

Edit 

Channel List

 menu will be displayed next. You can 

edit the channel list according to your preferences or 

press the 

Menu

 button to quit and watch TV.

While the search continues a message may appear, 

asking whether you want to sort channels according 

to the LCN

(*)

. Select 

Yes

 and press 

OK 

to confirm

.

(*) 

LCN is the Logical Channel Number system that organizes 

available  broadcasts  in  accordance  with  a  recognizable 

channel number sequence (if available).

Note:

 Do  not  turn  off  the  TV  while  initializing  first  time 

installation. Note that, some options may not be available 

depending on the country selection.

Media Playback via USB Input

You can connect 2.5” and 3.5” inch (hdd with external power 

supply) external hard disk drives or USB memory stick to your 

TV by using the USB inputs of the TV.

IMPORTANT!

 Back up the files on your storage devices 

before connecting them to the TV. Manufacturer will 

not be responsible for any file damage or data loss. 

Certain types of USB devices (e.g. MP3 Players) 

or USB hard disk drives/memory sticks may not be 

compatible with this TV. The TV supports FAT32 and 

NTFS disk formatting.
Wait a little while before each plugging and unplugging 

as the player may still be reading files. Failure to do 

so may cause physical damage to the USB player 

and the USB device itself. Do not pull out your drive 

while playing a file.

You can use USB hubs with your TV’s USB inputs. 

External power supplied USB hubs are recommended 

in such a case. 
It is recommended to use the TV’s USB input(s) 

directly, if you are going to connect a USB hard disk.

Note:

 When viewing image files the 

Media Browser

 menu 

can only display 1000 image files stored on the connected 

USB device.