Page | 19
E Series Installation Guide
Front Panel Controls Overview
The front panel contains an LED display and Jog Dial. These controls show system information and
allow direct management for some settings on the appliance. At a minimum, they power on/off the
appliance and provide access to retrieve or set IP addresses.
Front Panel Display
The front panel display operates in two modes:
l
Idle mode – the default mode; status screens cycle through display.
l
Configuration mode – pressing the Jog Dial to enters configuration mode; the
section explains functionality.
Jog Dial Operation
The Jog Dial on the appliance front panel is used to navigate the LED display to perform on-screen
commands.
l
Turn to scroll through options.
n
The square brackets cursor [ ] scrolls through items
on the screen when the front panel display is in
configuration mode.
The following example shows the Add option
selected by the cursor:
[ Add ]
n
The angle brackets cursor > < allows editing after a selection when the front panel display
is in configuration mode.
The following example shows the Delete option selected by the cursor:
> Delete <
l
Press to select options.
Power the Celestix Appliance
Connect power and turn on the appliance.