Page | 24
E Series Installation Guide
The factory default local administrator credentials are:
User name
: administrator
Password
: [Celest1x]
The password is case-sensitive and the brackets are included. The “domain\administrator” user name
format may be required.
Important: A certificate warning may display because the site uses a self-signed certificate. Accept
the certificate to access the web UI.
Quick Setup Wizard
While working through the wizard to configure
General Settings
, the appliance may need to reboot.
1.
Administrator Password
– the default local administrator password should be changed as a
security precaution because it is public knowledge. However, once the appliance has been joined
to the internal domain, domain administrator credentials must be used to access features.
n
User name
– the Administrator Password feature only changes the local administrator
password, which must be the logged in account.
n
Password
– enter and confirm a new password. Complexity requirements are noted on
the screen.
2.
Date and Time
– use onscreen controls to enter the date, time, and time zone, then configure
for daylight savings if necessary.
3.
Network Interfaces
– if DHCP was used initially to assign an IP address, select the LAN network
adapter to set a static address. A static address includes these settings:
n
Internet Protocol (IP) address
n
Subnet mask
n
Gateway address
n
Automatic or preferred DNS server
4.
Hostname and Domain
Note: Fields will be autopopulated with available settings if the appliance was joined to the
domain previously; the reboot will be skipped if they are left unchanged.
n
Hostname
– specify a name for the appliance; it must be unique.
For example:
cesa
n
Domain
– enter the name for the internal domain the appliance will join.
For example:
example.com
.