Page | 48
E Series Installation Guide
Note: Timing when to turn the Jog Dial is more important than how long it gets turned it. Two
full rotations should be adequate to start the recovery system process.
5. The front panel display will show
Celestix Appliance Installer
when the recovery process
launches. Menu options will display when the recovery system has loaded.
6. Turn the Jog Dial to scroll to the option
Create Last Good Version <<
and press to select.
7. Confirm when prompted.
The Saving System Image screen will show a progress indicator and an estimated time to completion
for the image copy process.
Caution:
l
DO NOT ACCESS OR TURN OFF THE APPLIANCE DURING THIS PROCESS
.
l
The appliance will shut down when the LGV process is complete.
Create a Backup
Once configuration is complete, creating a backup will provide another option to help remediate issues
that may result from future system updates or changes. Celestix recommends running the Windows
backup utility (
System
|
Backup
).
Now that the configuration steps, system image creation and backup are complete, check for
.
