Page | 58
E Series Installation Guide
Safety Precautions
l
Do not overload the AC supply branch circuit that provides power to the server.
l
Do not disable the power cord grounding plug. The grounding plug is an important safety fea-
ture.
l
Plug the power cord into a grounded electrical outlet that is easily accessible at all times.
l
Unplug the power cord from the inlet on the appliance rear panel to disconnect power to the
server.
l
Do not place anything on the power cords or cables. Arrange them so that no one can acci-
dentally step on or trip over them. Do not pull on a cord or cable. When unplugging the cord
from the electrical outlet, grasp the cord by the plug.
l
Do not plug telecommunications/telephone connectors into the NIC connectors.
l
This server contains an internal lithium battery. There is a risk of fire and burns if battery is not
handled properly. Do not attempt to recharge the battery. Do not expose the battery to tem-
peratures higher than 60° C. Do not disassemble, crush, puncture, short external contact, or dis-
pose of battery in fire or water.
l
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent
type recommended by Celestix. Dispose of used batteries according to local regulations for haz-
ardous waste.
WARNING:
n
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE.
n
DISPOSE OF USED BATTERIES ACCORDING TO HAZARDOUS WASTE PROCEDURES AS
REQUIRED IN YOUR AREA.
n
HAZARDOUS MOVING PARTS.
n
KEEP FINGERS AND OTHER BODY PARTS AWAY.