Erecting Procedure
10
Celina Tent Inc. - HGPTS - NSN: 8340-01-535-6379 (FEMA MOD)
11. Lift the other side of the frame up and slide the legs with base plates into
the bottom of the remaining corner fittings and pin using pin & bail.
10. Locate the corner tent top straps, 120” (300 cm) in length (HT531).
To
attach the tent top strap on a corner take the loop end through both 1½” (3.81
cm) welded D rings on each side, run the rest of the strap through the loop,
and pull tight. To reattach a removed tent top strap on a side take the loop
end through the 1½” (3.81 cm) welded D ring, run the rest of the strap
through the loop and outside slot of the base plate, and pull tight.
12. Put the other four legs with base plates on the bottom of all of the side
tee fittings and pin with pin & bail.
