Erecting Procedure
13
www.HGPTS.com
21. Take the strap down to the open slot on the
corresponding side of
each base plate, and pull tight.
20.
NOTE: X-Bracing straps go on every bay except the bay with the door.
To find the door bay stand under the center of the tent facing the direction
of the roof vent. The door bay is directly in front on the left.
19. Locate the fourteen X-Bracing straps, 148” (370 cm) in length. On each
corner and side tee fitting take the loop end through the 1¼” (3.175 cm)
welded D rings on either side of the hip/rafter poles, run the rest of the strap
through the loop, and pull tight.
Door Bay