Cellinx CamPilot MR330 User Manual Download

Page: 10 / 13

Web Setting

OSD

- Font Size : Normal / Big

- Date Enable : display date

- Time Enable : display time

- Channel Enable : display channel name

- X Axis: Input a point on the coordinate

- Y Axis: Input a point on the coordinate

Logo

- This means the image that is displayed on OSD of the transferred image.

- First, upload the logo image on “Expert/Firmware Update/OSD logo upload” (BMP file)

- Enable: Check the box to display the image

- X Axis: Input a point on the coordinate

- Y Axis: Input a point on the coordinate

► OSD on image

Date / Time / Channel Name

OSD logo

Web Setting

• Expert > PTZ / RS232

(under development)

• Expert > PTZ / RS232

- CamPilot MR330 does not support PTZ(RS485) function.

- This page will be deleted on the next firmware release.

Channel 1

- Channel Name : the channel name of OSD
- Channel Model (PTZ model)

: Select a model of the connected PTZ camera or receiver

- Channel ID (Rx Address)

: the Rx address of the connected PTZ camera or receiver

- Baud rate / Data bits / Parity / Stop bits

: select the value properly by the receiver type

RS232

- Baud rate / Data bits / Parity / Stop bits
: select the value properly by the receiver type

Web Setting

• Expert > Local Storage (Optional)

- Local Storage function is automatically mounted when inserted into the SD / SDHC card

slot.

Status

- Display the total space, used space and free space of SD / SDHC Card.

Record Setting

- Mode : Select a record type (OFF / Full Recording / Event Recording)

- Select a video stream of CamPilot MR330 (1st / 2nd / 3rd Stream)

- Select a overwrite setting of the local storage (ON/OFF)

File list

- Recorded file is produced every 10MB.

- User can download and delete a recorded file.

Web Setting

•

Expert > Port

Web

- Web Port: Default is 80

FTP

- FTP Port: Default is 21

All manuals and user guides at all-guides.com

Summary of Contents for CamPilot MR330














Search results

Summary of Contents for CamPilot MR330

Reviews:

Related manuals for CamPilot MR330

Brands by name

Popular brands

Cellinx CamPilot MR330, User Manual

Search results

Summary of Contents for CamPilot MR330

Reviews:

Related manuals for CamPilot MR330

Brands by name

Popular brands