49
Web Setting
Logo Upload
- Changes the logo image file.
- The process is same as “Firmware Update”
- Use GIF file (Maximum size : 567x175)
OSD Logo Upload
- Changes the logo image on OSD.
- The process is same as “Firmware Update”
- User have to use file name by “osd_logo.bmp”
(Maximum size : 120x38)
Control Protocol Upload
- Add a camera control protocol.
50
Web Setting
• Expert > Report
- User can check all of setting of CamPilot MR330.
- User or installer can memo on the report page.
- User or installer can print out this pages and use in various usages
• Reboot
- To apply the changed setting, reboot CamPilot MR330.
• Logout
- Back to the initial connection page
► Confirmation Dialog
51
Trouble-shooting
Before sending the CamPilot MR330 out for repair, check the items below.
If the problem persists after checking these items, contact your service center.
▲
▲
▲
▲
If no image appears
- Is the LAN cable attached securely?
- Are the power and voltage normal?
- Is the connected camera normal?
- Is there adequate illumination?
▲
▲
▲
▲
If the image is unclear
- Is the connected camera lens in focus?
- Is the connected camera lens dirty?
- Dirt or fingerprints on the lens can adversely affect the images.
Gently wipe any dirt or fingerprints off the lens with a soft cloth or lens
cleaning paper and cleaning fluid (commercially available).
- Is the connected monitor adjusted correctly?
▲
▲
▲
▲
If the Audio is not work
- Is the audio cable attached securely?
- Are the connected devices(amplifier, microphone, speaker and etc.) normal?
- Are the Client software and devices normal?
▲
▲
▲
▲
If the DIO is not work
- Is the DIO cable attached securely?
- Is the connected sensor or alarm device normal?
All manuals and user guides at all-guides.com
