25
Web Setting
③
③
③
③
PPPoE
- Use in case that the network supports PPPoE like xDSL
- Ask ISP(Internet Service Provider) for details
- User ID : xDSL user ID
- User Password : xDSL user password
- Service Name : Service name of ISP
- MTU : Maximum transmission unit of data
- IP address of DNS sever can be set to create automatically
- If your xDSL does not use static IP type, you should use Dynamic DNS setting like
DHCP
26
Web Setting
•
Basic > Video
- User can select video streaming type (Encoder or Decoder mode)
- CamPilot MR330 support only an Encoder mode
- CamPilot MR330 works as Encoder mode
27
Web Setting
Video Setting
- Preview : User can check the current video setting through the preview images.
(1st / 2nd / 3rd stream selectable)
- Video Compressed Type: H.264 / MJPEG
(Compression type of 3rd stream : MPEG4)
- Resolution : QQVGA / QCIF / QVGA / CIF / VGA / 4CIF / D1
(Resolution of 3rd stream : QCIF fixed)
- Bitrate Type : CBR / VBR
• Constant Bitrate : 8M / 7M / 6M / 5M / 4M / 2M / 1.5M / 1M / 750K / 500K / 384K /
256K / 128K / 64K / 32K
• Variable Bitrate : 1~6 (The highest quality is “1”)
- Frame Per Sec : 1 ~ 30 (NTSC) / 1~25 (PAL)
- Group Size : 1~200 (NTSC / PAL)
- Port : Video and Audio streaming port (Each stream must use different port)
- Video Type : NTSC / PAL
- Video Color : Auto / Color / B&W
- Aperture : 0~15 (Max. emphasis value is “15”)
- Brightness / Contrast / Saturation / Hue : 0~255
- X / Y offset : 1~21
Jpeg Capture
- Enable : Send JPEG Image via HTTP Protocol (1fps fixed)
- Resolution : Select a resolution (QQVGA~D1)
- Quality : High / 1 / 2 / 3 / 4 / Low
▶
Jpeg Capture
28
Web Setting
MEMOS
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
_____________________________________________
All manuals and user guides at all-guides.com
