CELLmatic 1502 – GSV/GSF
Issue: 2.1
User Manual
08.02.2004
Page 31 of 51
Thy
-
tronic
I/S – Bjørnevej 8c – DK 7700 Thisted – Tel.: +45 97982344 – Email.: Info@thytronic.dk
DISPLAY PICTURES
It is possible to select between 6 different display pictures informing about the working condition of the
compressor.
When the compressor has stopped some of the operating parameters will be "frozen". It means that they will
continue showing the value registered at the time where the compressor was asked to stop either because of a
cutout or another stop. To be able to see the operating parameters updated during a standstill the "frozen"
values will be shown in putting a bracket around the unit indicating the parameter against the value.
The initial picture can be considered as the first display picture indicating the operating parameters. With the
<F2> key it is possible to scroll both from the initial picture as well as from the other display pictures to a new
display picture without altering the function of the function keys. All display pictures are placed in a loop, for
which reason it is possible to keep on scrolling with the <F2>.