GB
1 Open the carton, you will find 2 parts of the tree with
metal stand.
2 Insert the lower part of the tree (the part of the tree that
has the longest branches) into the stand and fasten it
using the screws.
3 Fit the top part of the tree onto the lower part. The
lights built into the upper and lower halves of the tree
need to be connected together. Check where the
connector on the lower half of the tree is located before
attaching the top part of the tree.
4 Screw the lighting connectors together. Make sure that
the connectors are completely pushed together before
screwing them together with the lock nut.
Connect the mains adapter to the lights and then plug it into
an electrical socket.
