background image

3  

1.

Warning and Safety Instructions

 

 

 

 

 

 

 

 

 

 

 

 

 

 

This appliance is designed to operate from a mains supply of 110 -250V AC 50 Hz. Do not attempt 

to connect to alternative supplies. 

 

The mains plug is a standard UK 3 pin 5A plug. If this is damaged or removed 

 

If the mains lead becomes damaged or cut you must take the player to a qualified service technician. 

 

Do not place the mains lead where it may be tripped over or walked on. 

 

Do not place this player near hot radiators or other sources of radiated heat.

 

 

When leaving the appliance for long periods disconnect from the mains supply. 

 

Do not connect the appliance to other apparatus unless the supply is disconnected to all items. 

 

Do not operate this appliance in locations where moisture and high humidity are present such as: - 

Bathrooms, Kitchens, Near Swimming pools or other areas that may be wet or damp. 

 

Do not cover the appliance. Ventilation is necessary to keep the apparatus operating safely. 

 

For your safety do NOT open the appliance. There are no user serviceable parts inside.   

 

During thunderstorms, disconnect the TV from the mains outlet and the aerial if external. If leaving 

the TV for long periods such as holidays, disconnect from the supply and aerial also. 

 

It is advisable NOT to leave the TV in Standby for long periods. It should be turned OFF if being left 

for more than 2 hrs or over night.

 

 

  If the player fails to operate, consult the “Troubleshooting guide” on page 

27 

 

 

 

 

Changes or modifications by the user will invalidate your guarantee.

 

 

 

 

 

 

The lightening flash with arrowhead symbol, within an equilateral triangle, is intended to

alert the user to the presence of un-insulated “dangerous voltage” within the products 

enclosure that may be of sufficient magnitude to constitute a risk of electric shock to the

persons. 

The exclamation point within an equilateral triangle is intend to alert the user to the

presence of important operating and maintenance (servicing) instructions in the 

literature accompanying the appliance. 

The crossed out “Wheelie bin” is intended to show that this appliance must not be

placed with ordinary household waste.  When this appliance has reached the end of its

useful life. It must be disposed of in accordance with local by-laws. Consult your local 

waste disposal authority. (WEEE Directive) 

CLASS 1 LASER PRODUCT

 

DANGER: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED, AVOID 

EXPOSURE TO BEAM. 

Summary of Contents for DCS-2195







































Reviews: