background image

www.interphone.cellularline.com

www.interphone.cellularline.com - www.cellularline.com

Export Dept. international.interphone@cellularline.com

QUICK GUIDE 

EN

Functions

This user’s manual has referred to the latest information we had when this user’s 

manual was made. The screen display and illustrations are used in this user’s manual 

for the purpose of introducing details of this digital camera in a more specific and 

direct way. Difference may arise between these displays and illustrations and 

the digital camera actually available for you due to difference in technological 

development and production batch, under which case, the actual functions of this 

video camera shall prevail.

Announcements

Please read the Announcements carefully before using this video camera for 

proper and safe operation, so as to bring its optimum performance into play and 

extend its service life.

-  Do not expose the video camera to sunshine directly, nor point its lens to sunlight.  

Otherwise, the image sensor of the video camera may be damaged.

-  Take good care of the video camera and prevent water or sand particles from 

entering the video camera when it is used on the beach or water, because water, 

sand particles, dust or component containing salt may damage the video camera.

-  Keep the video camera contaminated free of dust and chemical materials. Place it 

in a cool, dry and well ventilated place.  Do not place the video camera in a high 

temperature, moist or dusty place. 

-  Please check if the video camera can operate normally before use.

-  If dirt or stain is accumulated on the video camera or on its lens, use soft, clean 

and dry rag to wipe it away gently.  If the video camera or its lens is stained with 

sand particles, blow them away gently.  Do not use cloth to wipe arbitrarily. 

Otherwise, it may scratch the surface of video camera or its lens.

-  If it is required to clean camera surface, firstly blow away the sand dust 

accumulated on this surface, and then wipe the camera gently with rag or tissue 

applicable to optical equipments.  Please use the cleaning agent of video camera 

for wiping if necessary.  Do not use organic solvent to clean the video camera.

-  Do not touch the lens surface with fingers.

-  Please back up the data if the memory card inside this video camera is used for 

the first time. 

-  The externally installed memory cards are manufactured from precise electronic 

components. Data may be lost or damaged under the following circumstances:

1.  Improper use of the memory card.

2.  The memory card is bent, dropped or collided.

3.  Place it under high temperature or moist environment or expose to sunshine 

directly.

4.  Electrostatic or electromagnetic field exists around the memory card.

5.  This memory card is taken out or power supply is interrupted when this video 

camera or computer is connected to the memory card (i.e. during reading, 

writing and formatting).

6.  Touch the metal contact surface of the memory card with fingers or metal materials.

System Requirements

System Requirements

Operating 

System

Microsoft Windows2000, XP, Vista, 7

CPU

Intel Pentium III of more than 800MHz  or other CPU with 

equivalent performance

Internal Memory Larger than 512MB
Sound Card and 

Display Card

The sound card and display card shall support DirectX8 or 

higher version.

CD Driver

Speed of 4 times or faster

Hard Disk

Free space of more than 500MB

Others

One standard USB1.1 or USB2.0 port

Introduction to Appearance and Keypad

(1) Memory card slot

(2) Reset

(3) USB slot

(4) Power button

(5) MIC

(6) Shutter button

(7) Mode Switch

(8) Lens 

(9) LCD TFT

(10) Working Indicator Light

(11) Indicator Light for charging 

(12) Wrist strap eyelet

Usage

1. Charge the built-in lithium battery

Connect the video camera with computer for charging in the shutdown state. 

The indicator light for charging is on at this time and will be off after charging.  In 

general, it can be fully charged after 2-4 hours.

2.  Use of Memory Card

2.1  Push the memory card into the card slot according to the concave lettering 

beside the slot of memory card till it is completely inserted.

2.2  To take out the memory card, gently press the end of the memory card inward 

and it will pop up.

Note: No built-in memory is available in this video camera. Make sure to insert 

memory card before using.

3.   Startup/Shutdown

3.1  Startup: Press the POWER button for 3 seconds, the screen is displayed and the 

camera is on.

3.2.  Shutdown:  Press the POWER Key, and the camera will be shut down.   

Automatic shutdown: when the idle time of the video camera reaches the time 

for automatic shutdown, it will be shut down automatically to save power.  The 

default time of this camera for automatic shutdown is 5 minutes.

Indicator Light 

for charging is on 

USB Cable

MOTIONCAMminiLCD for bike

Reviews: