17
5.3 OPENING AND CARRIARE CLEANING
3.
PUT THE HAND ON THE HANDLE “A” AND PUSH THE CARRIAGE ON THE RIGHT.
4. LIFT ON THE CARRIAGE TO OPEN.
Picture 1 Picture 2
5.4 REMOVAL OF THE BLADE-COVER
1.
LOOSEN THE KNOB “A” OPPOSITE TO THE BLADE
2. PUSH THE KNOB TOWARDS THE BLADE AND RELEASE THE BLADE- COVER FROM ITS
HOUSING.
3. REMOVE THE BLADE-COVER FROM THE SLICER AND CLEAN IT WITH A WATER JET.
Picture 1 Picture 2
5.5 CLEANING THE BLADE AND RING
CLEANING THE BLADE AND RING IS A DANGEROUS OPERATION, HENCE, TAKE GREAT CARE TO
PREVENT ANY POSSIBILITY OF CUTTING.
FOR THEIR CLEANING NEVER USE A WATER JET, BUT USE A DAMP CLOTH AND DETERGENTS,
THEN RINSE AND DRY WITH A CLOTH.
FOR THE CLEANING, USE NON-TOXIC PRODUCTS WHICH GUARANTEE THE PERFECT HYGIENE.
CLEAN CAREFULLY THE BLADE EDGE AND THE INSIDE OF THE RING.
A
A
Summary of Contents for VPR 300
