WALL MOUNTING INSTRUCTIONS
Always choose a safe location for the heater, keeping in mind the safety precautions outlined.
Ensure all packaging and the wall mounting accessories pack has been removed from the unit
before use.
1.
Mark the positions of the four holes to be drilled on the wall. Ensure there is a 300mm
clearance on all sides of the heater.
2.
Drill holes with an appropriate drill bit for the wall type you are mounting the heater on to.
3.
Insert the plastic rail fittings into the holes.
4.
Install the panel heater onto the four rail fittings matching the four holes on the heater.
5.
Screw the four screw bolts into the plastic rail fittings.
6.
Put the caps onto the end of the screw bolts. It is recommended to use some normal glue
to stick the caps onto the bolts.
To remove the unit from the wall, simply remove the bolt caps, unscrew the bolts with a screw driver
and take the heater down.
