14
TEMPERATURE MEASUREMENTS
1. Set the function switch to the green
Temp position.
2. Insert the Temperature Probe into the
input jacks, making sure to observe
the correct polarity.
3. Press the MODE button to indicate “ºF”
or “ºC”
4. Touch the Temperature Probe head to
the part whose temperature you wish to
measure. Keep the probe touching the
part under test until the reading
stabilizes (about 30 seconds).
5. Read the temperature in the display.
Note:
The temperature probe is fitted with a type K
mini connector.
A mini connector to banana connector adaptor
is supplied for
connection to the input banana jacks.
FREQUENCY (DUTY CYCLE) MEASUREMENTS (ELECTRONIC)
1. Set the rotary function switch to the green
Hz/%
position.
2. Insert the black lead banana plug into the
negative
COM
jack and the red test lead
banana
plug into the positive
Hz
jack.
3. Touch the test probe tips to the circuit under test.
4. Read the frequency on the display.
5. Press the
MODE
button to indicate “
%
”.
6. Read the % duty cycle in the display.
Summary of Contents for DT-6505
Page 1: ...User s Guide The Industrial Multimeter...
Page 2: ...1...
