29
Note:
Accuracy specifications consist of two elements:
(% reading)
– This is the accuracy of the measurement circuit.
(+ digits)
– This is the accuracy of the analog to digital converter.
Store capacitance 2000
Enclosure
Double molded, waterproof
Shock (Drop Test)
6.5 feet
(2 meters)
Diode Test
Test current of 0.9mA maximum, open
circuit voltage 2.8V DC typical
Continuity Check
Audible signal will sound if the resistance is
less than 35
(approx.), test current
<0.35mA
PEAK
Captures peaks >1ms
Temperature Sensor
Requires type K thermocouple
Input Impedance
>10MΩ VDC & >9MΩ VAC
AC Response
True rms
AC True RMS:
The term stands for ―Root-Mean-Square,‖
which represents the method of calculation
of the voltage or current value. Average
responding multimeters are calibrated to
read correctly only on sine waves and they
will read inaccurately on non-sine wave or
distorted signals. True rms meters read
accurately on either type of signal.
ACV Bandwidth
50Hz to 1000Hz
Crest Factor
≤3 at full scale up to 500V, decreasing
linearly to ≤1.5 at 1000V
Display
40,000 count backlit liquid crystal with
bargraph
Overrange indication
―
OL
‖ is displayed
Auto Power Off
15 minutes (approximately) with disable
feature
