19
Ver. 05-2015
IT
ALIANO
Manual de uso y mantenimiento
Err.14
Err.15
Err.16
Err.17
Err.18
Err.19
Error en la medición del desequilibrio. 1.
Verificar en el autodiagnóstico el funcionamiento correcto del
encoder.
2. Verificar la conexión de los registradores.
3. Verificar la conexión de tierra de la máquina.
4. Montar una rueda con un desequilibrio más o menos conocido
(seguramente inferior a 100 gramos) y verificar la respuesta de
la máquina.
5. Sustituir la placa del procesador.
Err. 20
Rueda parada. La rueda se para durante
más de un segundo después de START.
1.
Verificar en el autodiagnóstico el funcionamiento correcto del
encoder.
2. Verificar las conexiones en la ficha de potencia.
3. Sustituir la placa del procesador.
Err. 21
Motor encendido durante más de 15
segundos.
1. Verificar en el autodiagnóstico el funcionamiento correcto del encoder.
2. Verificar las conexiones en la ficha de potencia.
3. Sustituir la placa del procesador.
Err. 24
Distancia entre los radios inferior a
18 grados.
1. La distancia mínima entre los radios donde se divide el dese-
quilibrio debe superar los 18 grados.
2. Repetir la función de SPLIT aumentando la distancia entre los
radios.
Err. 25
Distancia entre los radios superior a
120 grados.
1. La distancia máxima entre los radios donde se divide el dese
quilibrio debe ser inferior a 120 grados.
2. Repetir la función de SPLIT disminuyendo la distancia entre los
radios.
Err. 26
Primer radio demasiado lejos del
desequilibrio
1. La distancia
máxima
entre la posición de desequilibrio y el
radio debe ser inferior a 120 grados.
2. Repetir la función de SPLIT disminuyendo la distancia entre los
radios y el desequilibrio.
Diagnóstico