3
ENGLISH
HYDRAULIC CRIMPING TOOLS
HT131-U and HT131-UC *
1. GENERAL CHARACTERISTICS
– Application range:
is suitable both for compression of electrical connectors on conductors up
to 400 mm
2
(800 MCM) and aluminium conductors up to 300 mm
2
(600 MCM) .
– Crimping force:
........................................................................................................... 130 kN
(14.6 sh ton)
– Rated operating pressure:
..................................................................................... 700 bar
(10,000 psi)
– Dimensions:
length .................................................................................................. 488 mm
(19.2 in.)
width with handles closed ........................................................... 149 mm
(5.8 in.)
width with handles open ............................................................. 349 mm
(13.7 in.)
– Weight
(without dies)
:
.............................................................................................. 5,4 kg
(11.9 lbs)
– Recommended oil:
..............................................................
AGIP ARNICA 22
or
ESSO INVAROL EP22
or equivalent
– Operating positions
. The three operating positions are identifi ed on the main handle, which
rotates relative to the reference symbol, (see Fig. 1).
Rest
position
(Handles locked): lock handles together when tool is not
in
use.
Release
position
: close the moveable handle (53) against the main handle
(04), in order to discharge the oil pressure and retract the dies.
Operating
position
: operate the moveable handle (53), to build up
pressure and close the dies.
– Advancing speed
. The tool has two forward speeds of the ram and automatically switches from
a fast advancing speed of dies to a slower crimping speed.
–
Safety
. The tool is provided with max pressure valve;
MPC1
special manometer, is available upon
request to check the correct setting of the valve.
*
The HT131-UC tool is the HT131-U tool fi tted with adaptor AU130-C (Ref. to Fig. 2).
