12
4.1
Loading labels from roll
4.1.1 Removing and installing the core adapters
Core adapters are mounted for better guidance of the label roll on the roll retainer when using label rolls with a core
diameter ≥ 75 mm.
Remove core adapters for smaller label rolls as follows.
3
4
5
2
1
Fig. 7 Core adapters and margin stop
6
2
Fig. 8 Core adapter unfixed (left)
and fixed (right)
5
2
7
Fig. 9 Margin stop unfixed (left)
and fixed (right)
Removing the core adapters
1. Open cover.
2. Turn ring (5) at the margin stop (4) counterclockwise, so that the arrow (7) points to the symbol , and thus
release the margin stop.
3. Remove the margin stop (4) from the roll retainer (2).
4. Turn the rings at the adapters (1,3) counterclockwise and thus release the adapters.
5. Remove the adapters (1,3) from the roll retainer (2).
6. Re-mount the margin stop (4) onto the roll retainer (2), turn ring (5) clockwise, so that the arrow (7) points to the
symbol , and thus fix the margin stop (4) on the roll retainer.
Installing the core adapters
1. Open cover.
2. Turn ring (5) at the margin stop (4) counterclockwise, so that the arrow (7) points to the symbol , and thus
release the margin stop.
3. Remove the margin stop (4) from the roll retainer (2).
4. Align the guide lugs (6) in the core adapters (1,3) with the grooves in the roll retainer (2) an push the adapters
onto the roll retainer.
5. Slide first core adapter (1) to the chassis until it stops and fix the adapter by turning the ring clockwise.
6. Place second core adapter (3) matching to the roll width and fix it by turning the ring clockwise.
7. Re-mount the margin stop (4) onto the roll retainer (2), turn ring (5) clockwise, so that the arrow (7) points to the
symbol , and thus fix the margin stop (4) on the roll retainer.
4
Loading material
