SKU 54949 For technical questions, please call 1-800-444-3353 PAGE 3
2.
Always wear eye protection. Wear ANSI approved safety impact eye
glasses when using this product.
PRODUCT USE AND CARE
1.
Maintain the Microscope with care. Keep this product clean. A properly main-
tained tool is easier to use. Do not use damaged optical instruments. Tag
damaged instruments “Do not use” until repaired.
2.
Check for misalignment or binding of moving parts, loose or broken parts,
and any other condition that may affect the Microscope’s operation.
If damaged, have the Microscope serviced before using.
3.
Use only accessories that are recommended by the manufacturer for your
model. Accessories that may be suitable for one product may become hazard-
ous when used on another product.
4.
The Microscope is a delicate, precise, optical instrument and should be
handled carefully and kept clean and dry to avoid damage. When not in
use, keep the Microscope covered with a dry, clean cloth. Dust and moisture
can damage the instrument.
5.
Do not touch the optical parts of the Microscope with your fingers. Doing so
may damage the lenses.
6.
If necessary, clean the lenses with a soft, dry brush. Do not clean with
moist cleaning agents.
7.
Because the Microscope is a complex device, any repair and adjustments
should be performed only by a qualified service technician.
SERVICE
1.
When servicing the Microscope, use only identical replacement parts.
Follow instructions in the
“Inspection, Maintenance, And Cleaning” section of this
manual. Use of unauthorized parts or failure to follow maintenance instructions
may create a risk of damage to the product.
SPECIFIC SAFETY RULES
1.
Maintain labels and nameplates on the Microscope. These carry important
information. If unreadable or missing, contact Harbor Freight Tools for a replace-
ment.
