T
HANK YOU for choosing a HARBOR FREIGHT TOOLS product. For future reference, please
complete the owner’s record below:
Model______________
Serial No._____________
Purchase Date_______________
SAVE THE RECEIPT, WARRANTY AND THESE INSTRUCTIONS. It is important that you read the
entire manual to become familiar with the unit BEFORE you begin assembly.
Technical Specifications
Dimensions:
12-1/2” L x 6-1/4” W x 7-1/4” H
Triangle Base:
6-1/4” L each side
Throat Depth:
1-5/8” Diameter
Jaw Opening:
7” Max.
Jaws:
2-1/2” W x 3/4” H
The Vise has a 360 degree swivel and tilts left, right, up and down.
Safety Warnings and Precautions
WARNING: When using product, basic safety precautions should always be followed to
reduce the risk of personal injury and damage to equipment.
Read all instructions before using this product!
1.
Keep work area clean. Cluttered areas invite injuries.
2. Check for damaged parts. Before using any product, any part that appears damaged should
be carefully checked to determine that it will operate properly and perform its intended function.
Check for any broken or damaged parts and any other conditions that may affect its operation.
Replace or repair damaged or worn parts immediately.
3.
Replacement parts and accessories. When servicing, use only identical replacement parts.
Use of any other parts will void the warranty.
4.
Always check hardware and assembled parts after assembling. All connections should be
tight and hardware tightened.
5.
Keep children away. Children must never play with the Vacuum Vise.
6.
Store idle equipment. When not in use always lock up the Vise and keep it out of the reach of
children.
7.
Dress properly. Gloves are recommended when using the Vise. Wear restrictive hair covering
to contain long hair.
8.
Use eye protection. Always wear ANSI approved impact safety goggles when using this
product.
9.
Maintain products with care. Keep the Vise in a dry location.
10. Use the right Vise for the job. There are certain applications for which this Vise was
designed. Do not modify this Vise and do not use this Vise for a purpose for which it
was not intended.
11. If struck by a striking tool, the jaws may chip, and possibly result in eye or bodily injury.
Always check the Vise before using it. Always replace the jaws if they are damaged.
SKU 91381
Page 2
